Language:
Sanidouche Flat
Ideal pumping solution for a low level shower tray. Capable of pumping a standard electric or gravity mixer shower. Two inlets mean a wash basin can be added too.
- Suits low level shower trays of 80mm and over
- Overcomes gravity drainage issues and allows basement showers
- Two part kit with shower flat pump plus gully and waste
- Pumps up to 3m vertically or 30m horizontally
The Sanidouche Flat is an ideal pumping solution for low level shower trays. It is capable of pumping a standard electric or gravity mixer shower and has two inlets so a basin can be added too. The shower pump can be installed next to a shower tray and overcomes gravity drainage issues so could allow for a shower in a basement. It is...
See more
Sanidouche Flat datasheet
Dimensions l x w x h (mm)
295 x 162 x 144
Sanidouche Flat | |
---|---|
Max. flow rate | 30 L/min at 1m |
Number of inlets available | 2 |
Diameter of inlets | 32 mm (shower) 40 mm (sink) |
Recommended discharge diameter | 32 mm 40 mm |
Engine consumption | 250 W |
Supply voltage | 220-240V/50Hz |
Maximum absorbed current | 1.3 A |
Electrical class | I |
Protection index | IP44 |
Maximum temperature of incoming water | 35 °C |
Max. horizontal discharge | 30 m |
Max. vertical discharge | 3 m |
Weight | 3.7 kg |
Switching height | 30 mm |
Shower tray height | 8 cm |