Submersible pumps

With Sanipump range, SFA offers a large range of professional sewage pumps.

With a grinder or Vortex version, single-phase or three-phase motor, the range meets all the needs for lifting sewage and grey water, including wastewater and rainwater.

SFA Pumpselect

Our sizing software helps you define the right sump pump for your project

Define my Sanipump

Sizing forms

You do not know which product to recommend to your customers? Fill out our form and an expert will answer you

View Forms

BIMObject

Download the 3D files of our products to integrate them into your project renderings

View files BIMobject

Submersible pumps

Sanipump ZPG 71

Sanipump ZPG 71

Cast iron submersible pump : Drainage and Storm Water Pumping Can be...

Sanipump ZFS 71

Sanipump ZFS 71

Cast iron submersible pump : High head Lifting of septic tanks, collective...
Sanipump GR/VX

Sanipump GR/VX

A submersive sump pump with macerator blades or Vortex version for use in...
Saniwell

Saniwell

The SANIWELL is a well pump:  Grain size: 1mm High lift height up to 80 M...

SFA offers a whole range of lifting station pumps called Sanipump. In grinder or Vortex version, with a single-phase or three-phase motor, the range meets all the needs for lifting sewage and gray water, including wastewater and rainwater. The installation of these sump pumps can be done in dedicated SFA stations or tanks already in place, or concrete tanks.

 

The Sanipump GR and VX are compact and lightweight portable pumps (only 13 kg) for domestic wastewater from toilets, bathrooms, kitchens or a laundry room, as they can operate with waste water up to 70 ° C (5 minutes maximum).

Thanks to the float activation system, the operation is completely autonomous.

The Sanipump lifting station pump is available in two versions:

Sanipump GR is equipped with a Pro X K2 knife maceration system. It evacuates water in a small diameter (DN 40), up to 14 m high with a flow rate of up to 11 m³ / h.

Sanipump VX is equipped with a Vortex impeller, it evacuates wastewater through a 50 mm diameter drain and lifts up to 13 m in height with a flow rate of up to 27 m³ / h.

Sanipump ZPG 71 is a submersible cast iron pump for pumping gray water (drainage water and rainwater in S1 mode), with a maximum lifting height of 31 m and a free passage of 40 mm.

Sanipump ZPG 71 is a pump for a lifting station, but can also be installed in a manhole or a pit.

All accessories are available for installation on the floor or on a base.

Sanipump ZPG 71 is compatible with the Sanifos 1600/2100/3100 and is available in 4 versions (1 single-phase and 3 three-phase).

Sanipump ZFS 71 is a submersible cast iron pump for pumping wastewater (collective sanitary facilities or establishments open to the public) with a high manometric head of 39 m.

This pump is compatible with the Sanifos 1600, 2100 and 3100 lifting stations.

Equipped with a high-performance macerating system and a double mechanical seal, it is available in 5 versions, single-phase and three-phase, with a lifting height of up to 39 m depending on the model.

All accessories are available for installation on the floor or on a base.

Sanipump SLD is a pump for pumping station dedicated to rainwater. It was designed for high flow rainwater (48 m3 / h). It has a two-channel impeller with a free passage of 50 mm.

Sanipump SLD is available in 3 models, single-phase or three-phase:

  • Sanipump SLD 700 S: single-phase pump
  • Sanipump SLD 700 SA: single-phase pump with float switch
  • Sanipump SLD 700 T: three-phase pump 

With the different options available, SFA gives you the possibility to have a tailor-made product to meet your exact requirements.

Available in a version without a seat base for easy installation or on guide bars with a coupling system. Accessory kits are available to provide an answer to all your needs, whether for a single or twin-pump installation. When 2 pumps are installed, it is recommended to install a ZPS control box and Aqua XL floats. All these pumps are guaranteed for 2 years.

Back to top